Posts Tagged ‘Parma’

« Older Entries

North Royalton Heat Pump Repair Guide: Reasons Your Heat Pump Can’t Maintain the Right Temperature

Wednesday, March 14th, 2012

When you set your North Royalton home’s thermostat for a certain temperature, you expect that your heat pump will either heat or cool it to that temperature, right? When you want 72 degrees, you don’t expect to have the temperature stay stuck at 70 degrees while your heat pump struggles futilely.

Sometimes heat pumps have trouble maintaining the right temperature, especially in heating mode. It’s not uncommon, and it has a number of potential causes. Run through this checklist to see if it is something you can fix yourself:

  • The outdoor unit is iced up. Running a defrost cycle can usually fix this.
  • A snow drift in encroaching on the outdoor unit, making the unit too cold to work properly. Shovel it away and see if that fixes the problem.
  • The outdoor unit is not running at all. Sometimes this is simple enough to fix on your own. Read the manufacturer’s instructions to troubleshoot the problem.
  • Too much cold air is getting in the house for the heat pump to keep up. Make sure your doors and windows are closed to keep that valuable heat inside.
  • Your vents are closed. It may seem obviou, but problems like this can sometimes be attributed to user error. Make sure your vents are open to allow heat in.

This is by no means an all-inclusive list, and it covers just those causes that you could potentially fix yourself. There are many other possible culprits out there that could be more sinister and require professional service to be properly repaired.

Some of these include:

  • The compressor is not running.
  • A compressor valve or reversing valve is faulty.
  • The thermostat is malfunctioning or needs to be recalibrated.
  • The refrigerant level is low or there is a problem with the flow of the refrigerant.
  • The heat pump needs routine maintenance.

If your North Royalton heat pump is not working properly for several days, especially after you have tried some of the DIY solutions above, call Pompeii’s Plumbing & Heating Inc. right away. Your heat pump may need repairs before a bigger problem develops.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Parma Plumber’s Guide: How to Fix a Slow Drain

Monday, December 26th, 2011

Ever fill up a bathroom bowl or kitchen sink with water in your Parma home and then wait forever for the water to drain? A clogged drain can take forever to free up and is often the source of frustration and a loss of precious time as you get ready for work or play.

The solutions to fixing a slow drain can be very simple or complex, requiring a little patience or expertise to a major service or repair bill. Let’s hope the solution is the former and not the latter. And here are some suggestions.

If your bathroom sink is draining slowly, remove the stopper and inspect it for any “cling-ons” – namely hair. One of the most common clogs can be hair wrapped around the shaft of the stopper. Remove the hair, replace the stopper, run some hot water and check to see how quickly the water drains down. If that simple fix doesn’t work, dig a little deeper.

Hair can be tangled in the flange or the horizontal rod and clip, further down the pipe. You may need to dig out the hair or debris with a long object like a screwdriver or wire hanger. Don’t bring out the “big guns” like a snake or auger if something simpler will do the trick.

Once the debris is cleared, you may even want to use a small hand plunger to force air down the pipe and remove any other residual debris that may be slowing down the water flow. These steps should clear up the problem. A liquid or granulated drainer cleaner may also break up the clog. Running hot water can do the trick, too.

If these solutions don’t work, a slow drain could be the result of a more serious problem. At that point you may want to use a snake on the problem or call a professional plumber to fix it.

If your kitchen sink drains slowly, the problem could be a build-up of food or grease in the pipes. Once again, using a plunger or chemical drain cleaner may solve the problem. But don’t discount the fact that something may be blocking the pipes, like a piece of bone. A visual check of the problem might be the simple solution to the slow drain “mystery.”

If you are at your wit’s end and the water drainage continues to be a problem, call a professional plumber. They may even be able to walk you through a cleaning process over the phone.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Question from Avon Lake: What Causes Low Water Pressure?

Monday, December 19th, 2011

Low water pressure in your Avon Lake home can make just about everything from showering to cleaning more difficult. It is frustrating, but it often seems like there is very little you can do about it. In fact, you may be able to improve your water pressure in a variety of ways, but the appropriate technique will depend on the root cause of your problem.

There are several different possible causes for low water pressure. If the problem is limited to certain areas or fixtures in the house, it may very well be because the pipes feeding that area or fixture are too small. Smaller pipes will only allow a smaller amount of water to pass through at once, making it impossible for you to get the force you are after.

Fixing this, of course, means putting in larger pipes, and that may be easier said than done. However, if the problem is on a small scale, you should not have too much trouble or need to pay too much to have a professional complete the job. A problem in a particular fixture can also result from small clogs or backups in the fixture itself, and this is a relatively easy situation to remedy as well.

A low water pressure problem that affects your whole house can result if the main pipes feeding into your house are too small. This could be the case if your house has been added onto since it was built or if you have more people living there now and using more water.

Replacing those incoming pipes is a big job, but it is often the only way to increase your water pressure and make it possible for the system to satisfy the water needs of the house. This is definitely something you will want to have a professional plumber work on, and while it can be costly, it will be well worth it in the end.

Another possible reason that you might have low house-wide water pressure is that you live at the end of the area water system or that you use an improperly located well. If your well is downhill from your home, for instance, you should consider installing a booster pump that can help move the water into your house more efficiently. The same remedy can work if you live on the outskirts of town and at the limit of your town’s water system.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Why is My Cleveland Furnace Turning On and Off?

Wednesday, December 14th, 2011

One of the most annoying things your Cleveland home’s furnace can do is to constantly keep turning on and off. This on-off cycling keeps your home from heating up properly. This action – called short cycling – also requires more electricity and drives up utility bills.

Short cycling is caused by an overheated furnace, which triggers safety mechanisms and shuts down the furnace. After a brief interval and cooling down, the furnace starts up again the cycle keeps repeating itself. Not only is it an annoyance, it can also signal more serious problems. A leaking heat exchanger can cause a furnace to overheat – and produce deadly carbon monoxide gas.

If a furnace is working too hard and overheating, it is usually because of airflow in and out. Your home’s ventilation system needs to be clear of dirt, dust, and debris. The more blockage in your ductwork and vents, the more friction is created, slowing down airflow and ultimately ending with an overworked furnace that continues to cycle on and off. And a blocked exhaust vent, such as a chimney or dedicated exhaust vent, can also cause a furnace to work harder. Check for things like leaves or bird’s nests.

The blockage may also be coming from a clogged furnace filter. You should clean or replace your furnace filter after a visual inspection reveals any type of build-up of dust or dirt. Do this at least every three-six months.

If you have a two-speed fan on your furnace, it is recommended that you run the fan in low speed during the cold months and high speed in the warm months. The reason? Warm air is lighter and takes less force to move.

There are other measures to take to prevent short cycling but these usually require a professional heating and cooling service technician to correct the problem. If in doubt, call your local qualified heating and cooling contractor and schedule a furnace inspection. Don’t make your furnace work any harder than it was designed for – and keep your home’s occupants comfortable and safe.

Tags: , , , , , ,
Posted in Heating | Comments Off

Brook Park Heat Pump Maintenance

Friday, December 2nd, 2011

Heating and cooling your Brook Park home is a priority. You need your home and family to be comfortable all year round, so you either got or are considering a heat pump. These machines are great because under the right circumstances, they are essentially all-inclusive and incredibly efficient solutions for all your home heating and cooling needs.

Notice the “under the right circumstances” part. A number of things have to be considered when choosing a heat pump, such as the climate and the size of your home. But these are not the only circumstances that influence how well your heat pump works for you. Proper maintenance is a vital component of heat pump ownership, ensuring that you get the best performance out of your heat pump for the longest time possible.

A major part of properly maintaining any machine is to keep it clean. A heat pump is no exception. Dirt and dust can affect the efficiency of your heat pump, as well as speed up corrosion problems. Keep the compressor and coils clean. Check them monthly or so and remove any accumulated dirt. Also, consistently check and change filters according to the manufacturer’s recommendations.

Simple cleaning is an easy and effective first step to heat pump maintenance, but there are some things that you just won’t be able to do on your own. For more intensive maintenance, it is best to call in a professional for an annual inspection.

During a routine maintenance check of your heat pump, a technician will inspect the whole heat pump system for problems. He will clean the compressor and coils, tighten any connections that may have loosened up and change the filters as needed. In addition, a skilled technician will be able to detect any early signs of trouble and make necessary repairs to prevent break downs. These small repairs can prevent big problems later on, thereby preventing some serious discomfort and a possible big expense.

If you are considering a heat pump as a heating and cooling solution for your home, great. If you have already decided on one and had it installed, congratulations on making a smart decision. Now, make another smart decision to protect that investment by keeping your new heat pump properly maintained.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

How Indoor Air Quality Controls Can Help People with Asthma: A Guide from Brook Park

Monday, November 14th, 2011

If you, your child or anyone else in your family suffers from asthma, you know that it can be brutal. The shortness of breath, the wheezing, and the chest tightness—it’s not just uncomfortable; it can be downright scary.

There is evidence to suggest that higher quality air can help keep asthma symptoms in check. While you can’t control air quality everywhere you go, you can be in charge of the quality of the air in your Brook Park home. Take a look at how controlling indoor air quality can help ease the suffering of asthma symptoms.

One study at Johns Hopkins found that indoor air pollution plays a large role in increasing asthma symptoms, especially among children. Without getting too technical, essentially the study explains that there are particles in the air we breathe, including indoors. Aside from the standard mixture of oxygen, carbon dioxide and other gases, air contains these solid and liquid particles, which are essentially pollutants. Common household tasks like dusting and cooking can generate more of these particles.

When these particles get into the respiratory system, they can irritate the lungs, which triggers asthma symptoms. Since children spend about 80% of their time indoors, this is a very big deal.

To help this problem, there are ways to control and improve the quality of air in your home. One simple way to do this is to have filters with high minimum efficiency reporting value (MERV) ratings in your heating and cooling system. MERV ratings describe how well filters catch particles of certain sizes and keeping them out of the air—and your lungs.

The particles identified in the Hopkins study were as small as 2.5 microns, which would require a filter with a MERV rating of about 12 to catch. Higher MERV ratings mean more efficient filtration, but they need to be replaced more often. If you or child has asthma, it’s worth it.

For severe asthma or allergies, consider even higher-rated filters, like HEPA filters, which sport a MERV of 17 or higher. These will catch nearly all allergens, irritants and other particles that can make you sick.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

Furnace Safety: Some Advice from Parma

Monday, November 7th, 2011

There are many advantages to a properly operating furnace in your Parma home. The most important are the safety and comfort of a home’s occupants and the cost of running the furnace. There are several things you can do to ensure the safe operation of your furnace.

Here is a checklist of ideas:

  • Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
  • Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
  • A clear air intake is important too, since furnaces need fresh air to “breath” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
  • If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
  • Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
  • You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
  • Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
  • Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a qualified heating professional to check out your furnace.

Tags: , , , , , , ,
Posted in Heating | Comments Off

Why Fall Maintenance is Important for Your Heating System: A Tip from West Side

Monday, October 10th, 2011

When it comes to heating equipment maintenance and repairs to your West Side home comfort system, it does not pay to procrastinate. The longer you put off the maintenance, the higher the probability that your heating system will break down or your heating and cooling contractor will be unable to make an emergency repair when you need it. That’s why fall is the best time of the year to have maintenance and repair procedures performed.

Consider this: when do most people call a heating and cooling contractor? The answer: when they need a repair. The call could come in the middle of the night when a furnace stops working or during a family party on a weekend – both times when it is hard to find someone to do the repair work. Has this happened to you?

You can avoid this aggravation and extra expense by scheduling fall maintenance for your heating system. fall is often the “slow season” for heating and cooling professionals and many schedule their routine service and maintenance appointments during this time. Contractors expect to be busy during the peak winter months and prefer to spread out the workload as evenly as possible.

Most heating and cooling contractors offer service or maintenance agreements, which lock in at least one or two visits a year for furnace or air conditioner inspection. It is rare to find a contractor who will schedule a furnace inspection during the cold winter months. They know that time is usually saved for people with real emergencies. If you don’t have a service agreement with a contractor, you may want to consider signing up for one and avoid the risk of waiting in line for a furnace repair in the dead of winter.

During fall maintenance, your heating equipment will be switched on and inspected. That may sound routine but by running your heating system early, you may be spared the expense of repairing your system when it fails to operate or run smoothly during the cold months. If there is a problem, it is better to fix it ahead of time.

There is no guarantee that a furnace that is tuned up in the fall will last throughout the winter without needing service. But a little preventive maintenance ahead of time will save a lot of heartache – and dollars – when a real emergency comes up.

Tags: , , , , ,
Posted in Heating | Comments Off

How Does a Heat Pump Work? A Question From Rocky River

Monday, October 3rd, 2011

If you’re in the market for a new Rocky River home heating and cooling system, a heat pump is definitely an option worth considering. However, while the popularity of these systems is growing rapidly, many people still don’t understand what they’re all about. Before you go out and get yourself a new home comfort system, you should make sure you really know what you’re looking at

As their name suggests, heat pumps move heat from one location to another. However, their name can be misleading as well. Heat pumps are able to both heat your home in the winter and keep it cool in the summer by taking heat from the air in one place and sending it to another.

For example, your heat pump will remove the heat from your indoor air in the summer and pump it outside to keep your home cool. In the winter, the process is reversed, and the heat pump gathers heat from the outdoor air and pumps it inside to keep you house warm.

Of course, it’s not hard to see how the air inside your home in the summer has heat in it. But the outdoor air in the winter is cold. So how does a heat pump heat your house with cold air? Well, the truth is that there is almost always some heat in the air, no matter how cold it seems to you and me.

In fact, the temperature would have to drop well into the negative range before there was absolutely no heat to be found in the air. And heat pumps are specially designed to find that heat and collect it.

Basically all heat pumps work on this principle. However, they can’t keep your house comfortable all on their own. Heat pumps are usually installed as part of a complete home heating and cooling system. This means they’ll be paired with an air handler that can circulate the temperature controlled air throughout the house.

There are also some heat pumps that supplement the amount of heat they’re able to pull out of the air by heating it as it passes through. These types of heat pumps are often more effective in cooler areas, but because they require more energy to actually generate heat, they’re not typically as energy efficient as models that rely on their ability to get heat only out of the air.

Tags: , , , , , ,
Posted in Heating | Comments Off

Allergens Affected by Indoor Air Quality Systems: A Tip From Olmsted Falls

Monday, August 22nd, 2011

Indoor air quality devices are designed to capture and remove certain allergens from the air, but what exactly is being removed and how would those allergens affect your health if left to circulate? Here is a quick rundown of common allergens found inside the average Olmsted Falls home and why you should have them removed:

  • Dust Mites – Dust mites develop in high humidity conditions – above 50%. This means that dehumidification to a healthy range between 35-50% will keep them from developing and ensure your indoor air stays comfortable and safe. Dust mites are not dangerous but they can severely increase complications from asthma and other uncomfortable conditions.
  • Animal Dander – Dander from cats, dogs, birds and other furry or feathered creatures is a common allergen for millions of people. If you suspect dander as an allergy, go on vacation to a place without dander and see how it affects you or your loved ones.
  • Dust and Dirt – Dust is in every home and while it is a common irritant, it can inflame asthma or worsen allergies many times over.
  • Pollen – Pollen is a problem for anyone with seasonal allergies or hay fever. While medicine can help, proper sealing of your house and indoor air filtration can reduce the presence of pollen from clothing and animals.
  • Mold Spores – Mold develops in high humidity and in ductwork where it is dark and sometimes damp. Proper filtration with a HEPA system and dehumidification will reduce this risk.
  • Bacteria and Viruses – Bacteria can develop in the air from common colds, old food or outside contaminants. Use a UV light to remove these from your air handler or ductwork.
  • Smoke and Exhaust – Indoor/outdoor ventilation can allow in smoke and exhaust that irritates most lungs. To avoid this problem install an electronic air cleaner that can target particles in smoke.

Getting rid of allergens in the air is an important aspect of maintaining a clean and healthy household. Proper air cleaning, filtration and UV purification will reduce these allergens many times over. There are also some great tips on the Asthma and Allergy Foundation website for how to reduce the presence of those allergens to start with.

Tags: , , ,
Posted in Indoor Air Quality | Comments Off

« Older Entries