Posts Tagged ‘Middleburg Hts’

« Older Entries

Middleburg Hts. Indoor Air Quality Tip: Things Your Air Filter Can’t Filter

Friday, February 17th, 2012

Air filters are great to have in your Middleburg Hts. home. Many people who own air filters, especially those who suffer from allergies or asthma, swear by them as being very beneficial to their health and general well-being. They help you feel comfortable knowing that your air is clean and fresh.

But how confident should you be in your air filter? Is there anything your air filter is missing? Can you be sure that your air is as clean as can be?

Well, all air filters have limitations, and many do particularly well at trapping and removing certain types of air pollutants, but at the expense of letting others pass. What your air filter can and cannot do depends on what kind of equipment you have.

A conventional air filter, like the pleated kind you may have in your air conditioner, is designed to trap particles in the air. Pollen, dust, dander and other small but solid pollutants and irritants get trapped in their close-knit fibers. The thing to pay attention here is the filter’s HEPA rating—the higher it is, the smaller the particles it can trap. So, if you are using a lower rated filter, you may be trapping pollen but still breathing in smoke particles. Also, sometimes large, heavy particles settle before reaching the filter and can’t be trapped.

In addition to filters, there are other air cleaning options like ultraviolet germicidal (UVG) lights and photocatalytic oxidation (PCO) cleaners. PCOs are meant to filter out harmful gases, but have limited use in homes. UVG lights use radiation that is harmless to people but deadly to microorganisms to pure air of bacteria and other pathogens.

In sum, if you are concerned about the quality of the air in your home, the best strategy is probably to use multiple solutions, such as a combination of an air filter and UVG lights, in order to get rid of as many pollutants as possible. Keep in mind, though, that no system is perfect in keeping everything out of your air.

If you have any questions about what type of system will work best in your Middleburg Hts. home, call Pompeii’s Plumbing & Heating today!

Tags: , , , , , ,
Posted in Services | Comments Off

Avon Lake Plumbing Guide: Easy Drain and Sewer Maintenance

Friday, January 27th, 2012

When it comes to your Avon Lake home’s plumbing, one of the most important things you can do is perform regular drain and sewer maintenance. Those pipes are vital to maintaining a steady flow of waste water out of your home – if something goes wrong, you’ll regret not fixing it earlier. Here are some easy strategies for maintaining your drains and sewer lines:

  • Avoid Unflushable Items – Some items are designed to be flushed down the toilet. Everything else is not. If something isn’t specifically designed to go down your toilet, don’t put it down there. This includes paper towels, napkins, any kind of food, floss, or hair, and anything else that should go in a garbage can. Toilets may seemingly whisk everything away in one flush, but a lot of that stuff can get stuck on its trip to the sewer.
  • Clear Drains Weekly – You can’t clean your sewer line without professional help, but you can do your best to keep drains clear on their way out. Use boiling hot water and lemon juice or a mixture of baking soda and vinegar once a week to clear out the drains of any excess build up. Also, avoid putting any grease or other gunk down the drain that might stick to food particles and clog the drains.
  • Have Slow Drains Inspected – If a drain in your home slows down significantly, have it inspected. It might be a bit of hair stuck in a trap somewhere, or it could be your sewer line starting to clog. It’s better to know now than to wait and fall victim to a much larger problem in weeks or months.
  • Use Drain Strainers – Don’t let anything go directly down the drain. Use strainers to block food, hair or other stuff from getting into the sink or bathtub drains. Hair in particular, when mixed with grease or soap can become a glue-like substance in your drains.

Drainage and sewer maintenance are services that can be scheduled with Pompeii’s Plumbing and Heating to ensure that all your drain lines are open and flowing efficiently to maximize residential drainage. It is the general maintenance that helps to stop small unseen issues, before they turn into larger and much more costly situations.

Tags: , , , , , ,
Posted in Services | Comments Off

Amherst Plumbing Repair Question: Why Does My Sink Backup When I Run the Washing Machine?

Wednesday, January 25th, 2012

Every now and then something strange happens that is simultaneously baffling and frustrating. Gray water from your washing machine backing up into your sink is one such problem and for many Amherst homeowners it can be an ongoing source of annoyance.

Why does this happen? To start with, know that your sink and washing machine drain lines tend to run congruent to each other. This means they combine at some point on the way to the main sewer line. So, if there is a problem after they combine, it can affect both systems.

How to Fix the Problem

First, you must pinpoint the problem. More often than not, a washing machine backup will occur in one or more sinks during or after the drain cycle of your washing machine. This may not happen every time or it may get progressively worse. It depends on why it is happening in the first place.

If the sink doesn’t back up on its own when you do the dishes or run the faucet, the clog is probably deeper in the pipes and only responds to the large volume of water being drained from your washing machine. In either case, you probably have a clog in the drainage pipe after the two combine.

Do NOT use any chemicals to clear the clog. Not only do chemicals cause damage to your pipes, which can lead to cracks and leaks later, they are not always effective at actually removing the problem – they simply minimize it in the short term.

To solve the problem, you’ll either need to plunge the sink and hopefully clear out the clog or have someone snake the line to pull the clog out of the drain pipe. If you cannot clear it on your own, it may be a good time to call an Amherst plumber for a more in-depth attempt to fix the problem.

Tags: , , , , , , ,
Posted in Services | Comments Off

What to Look for When You Have Water Damage: A Tip from Sheffield

Monday, November 21st, 2011

Water can be a beautiful thing. But it can be a very nasty thing, too. While water is an essential for life, it brings a high price tag when gone unchecked and allowed to seep, leak, and drain into your Sheffield home. Damage caused by water can cause structural damage to a building and destruction of its contents. When left unchecked – over time – water damage can lead to mold growth and have a serious affect on building occupants’ health.

The destructive forces of water leave telltale signs throughout a building. Let’s look at some.

  • Wood damage – water can saturate wood, causing it to rot and decay. Check for discolored wood around plumbing fixtures, a sure sign of an ongoing or older leak that has since been repaired. Just because a leak has been fixed, the after-effects can linger. Soft or uneven surfaces around a plumbing fixture are a sure indication of water damage. Pull back carpeting, pads, tiling, or flooring to get to the root of the problem.
  • Drywall damage – porous material like drywall can leave many signs of water damage and, like wood, can be seriously degraded by water damage. Check for discoloration around plumbing fixtures and soft spots. Don’t assume that a dry surface that is stained is not a structural problem. You may have to cut out the drywall to reach the true source of the water damage.
  • Ceiling tile stains – a sure sign that water is coming in from a source above a roof or ceiling. Ceiling tiles are a porous material that are great for showing every little bit of moisture or water that comes in contact with them. The same is true with plaster or drywall ceilings. Stains indicate a more serious problem and should be investigated right away.
  • Damp, musty smells – water can leave some unpleasant odors, especially untreated water. Leaks or standing water are a source for higher humidity levels in a home. If you are standing in an area where water has soaked into floors or walls, there is often a damp, humid smell. Don’t mistake it for high humidity levels in the home. The smell can come from hidden sources like a leaking pipe joint or broken valve behind an access door.
  • Mold build-up – wood and drywall surfaces provide great food for mold growth when saturated with water. The mold can be of a harmless nature but often can become dangerous black mold. When black mold spores are airborne they can cause respiratory problems and even worse, medial problems down the road. Look for unusual clusters of mold in damp areas and if you find some, immediately call a professional plumber to suggest clean-up and to repair the source of the water leak.

There are many signs of water leakage in the home, caused by leaking or broken pipes, dripping faucets from worn-out washers, cracks in the walls and foundations allowing ground and rain water to seep in, etc. Find and fix the source immediately or pay even higher costs in repair and medical bills later on.

Tags: , , , , ,
Posted in Services | Comments Off

Why Fall Maintenance is Important for Your Heating System: A Tip from West Side

Monday, October 10th, 2011

When it comes to heating equipment maintenance and repairs to your West Side home comfort system, it does not pay to procrastinate. The longer you put off the maintenance, the higher the probability that your heating system will break down or your heating and cooling contractor will be unable to make an emergency repair when you need it. That’s why fall is the best time of the year to have maintenance and repair procedures performed.

Consider this: when do most people call a heating and cooling contractor? The answer: when they need a repair. The call could come in the middle of the night when a furnace stops working or during a family party on a weekend – both times when it is hard to find someone to do the repair work. Has this happened to you?

You can avoid this aggravation and extra expense by scheduling fall maintenance for your heating system. fall is often the “slow season” for heating and cooling professionals and many schedule their routine service and maintenance appointments during this time. Contractors expect to be busy during the peak winter months and prefer to spread out the workload as evenly as possible.

Most heating and cooling contractors offer service or maintenance agreements, which lock in at least one or two visits a year for furnace or air conditioner inspection. It is rare to find a contractor who will schedule a furnace inspection during the cold winter months. They know that time is usually saved for people with real emergencies. If you don’t have a service agreement with a contractor, you may want to consider signing up for one and avoid the risk of waiting in line for a furnace repair in the dead of winter.

During fall maintenance, your heating equipment will be switched on and inspected. That may sound routine but by running your heating system early, you may be spared the expense of repairing your system when it fails to operate or run smoothly during the cold months. If there is a problem, it is better to fix it ahead of time.

There is no guarantee that a furnace that is tuned up in the fall will last throughout the winter without needing service. But a little preventive maintenance ahead of time will save a lot of heartache – and dollars – when a real emergency comes up.

Tags: , , , , ,
Posted in Services | Comments Off

How Does a Heat Pump Work? A Question From Rocky River

Monday, October 3rd, 2011

If you’re in the market for a new Rocky River home heating and cooling system, a heat pump is definitely an option worth considering. However, while the popularity of these systems is growing rapidly, many people still don’t understand what they’re all about. Before you go out and get yourself a new home comfort system, you should make sure you really know what you’re looking at

As their name suggests, heat pumps move heat from one location to another. However, their name can be misleading as well. Heat pumps are able to both heat your home in the winter and keep it cool in the summer by taking heat from the air in one place and sending it to another.

For example, your heat pump will remove the heat from your indoor air in the summer and pump it outside to keep your home cool. In the winter, the process is reversed, and the heat pump gathers heat from the outdoor air and pumps it inside to keep you house warm.

Of course, it’s not hard to see how the air inside your home in the summer has heat in it. But the outdoor air in the winter is cold. So how does a heat pump heat your house with cold air? Well, the truth is that there is almost always some heat in the air, no matter how cold it seems to you and me.

In fact, the temperature would have to drop well into the negative range before there was absolutely no heat to be found in the air. And heat pumps are specially designed to find that heat and collect it.

Basically all heat pumps work on this principle. However, they can’t keep your house comfortable all on their own. Heat pumps are usually installed as part of a complete home heating and cooling system. This means they’ll be paired with an air handler that can circulate the temperature controlled air throughout the house.

There are also some heat pumps that supplement the amount of heat they’re able to pull out of the air by heating it as it passes through. These types of heat pumps are often more effective in cooler areas, but because they require more energy to actually generate heat, they’re not typically as energy efficient as models that rely on their ability to get heat only out of the air.

Tags: , , , , , ,
Posted in Services | Comments Off

Get the Best Value from Your Contractor: Some Pointers From Sheffield

Wednesday, September 21st, 2011

When looking for the best value from a service provider, it is best to understand what value means to you. The dictionary defines value as “a fair return or equivalent in goods, services, or money for something exchanged.”

In the case of a mechanical contractor, customers are looking for value in the quality of the replacement or newly installed parts or equipment. For example, if your contractor gives you the choice of a product that is warranted for five years versus one that is warranted for ten years – and the price for the longer warranty is within reason, it may be more valuable to choose the product with the longer warranty. It may cost more initially but it is less likely to be serviced as much and will last longer.

Similarly, your contractor may offer a value proposition which includes a “good,” “better,” “best” scenario for the product you are shopping for. You may choose from any of the three based on the amount of time you plan to live in your home or the level of comfort or convenience that you are accustomed to. And, if you choose a “good” product over a “best” product, it may diminish the value of your house when it comes time to sell.

Any good contractor who gives you these choices is one who is giving you the best value.

When it comes to service, there are also value choices, too. For example, how important is it to you to work with a contractor who values your time? Today, time can be just as important as money and is certainly a value consideration. One contractor may only be able to give you a large window of time when his company will be able to serve you, say 8:00 a.m. to 3:00 p.m. Is it worth your time or someone else’s to wait? Another contractor may be able to give you a shorter window. It may cost a little more but is it worth it to you? The answer is likely to be yes; and this adds a value to the contractor who respects your time.

Another value consideration when choosing a contractor is the “guarantee proposition.” That is, does your contractor have a service or maintenance plan that will keep your equipment in maximum working order based on regularly scheduled maintenance and inspections? Or would you rather hire a contractor to make the original installation or replacement and “hope” there are no breakdowns or expensive repairs during the time you own your home? There is definite value in a contractor who believes that “face time” is a valuable commodity and would be happy to see you on a regular basis to maintain your equipment and keep you up-to-date on any changes that might affect your equipment.

The true value of a contractor lies in the equipment he sells, the service he provides, and the peace-of-mind and time savings you get in return.

Tags: , , , , ,
Posted in Services | Comments Off

The Ins and Outs of Ductless Splits Air Conditioning: A Tip From Middleburg Heights

Wednesday, August 17th, 2011

So, it’s time to install a new air conditioner and you’re pretty sure there just isn’t enough room in the walls or ceilings of you Middleburg Heights home to place the necessary ductwork. No problem. There is a rapidly evolving technology that allows you to have air conditioning without ductwork. It’s called mini-split ductless air conditioning and it relies on individual units placed in key locations around your house. Here’s how they work.

Multi-Zone Cooling

The first step is to install a central unit. This is your compressor and condenser and is usually placed outside like the core of a central AC system. These units range between 15,000 and 40,000 BTUs depending on how much cooling your home needs and will support up to 4 zones within your house.

Once the central unit is installed, smaller room-sized units are placed throughout your house. These units are designed for between 9,000 and 18,000 BTU spaces and are usually placed high on the wall of your room to distribute cooled air. The smaller units are connected to the main unit by refrigerant lines that are run up the side of your house (or inside if you want them out of the elements).

Because each indoor unit is individual and has its own thermostat, you save electricity by having direct control over each part of your home. In fact, the average ductless split system uses something like 30% less electricity than a standard air conditioning system.

Is it Right for You?

This is the most common question we hear and to be honest, it really depends on your needs. If you have a large house – we’re talking 3,000 square feet or bigger, a multi-zone ductless system may not provide enough cooling on its own. Most systems only support up to 4 individual units and therefore cannot cool massive spaces. However, if you have a smaller home, or more importantly have no space for ductwork, these systems are much more efficient than installing multiple window units.

Plus, for those with inferior heating systems (or mild winters), most ductless systems provide heating in the winter as well. Not a bad tradeoff for a relatively simple installation and lower electricity costs.

Tags: , , , ,
Posted in Services | Comments Off

Top 10 Mistakes People Make When They Buy HVAC Equipment

Friday, July 15th, 2011

Every year millions of homeowners buy a new HVAC system for their home. Whether for heating, cooling or air quality, they make a huge investment in a new system that will be with them for years to come. Unfortunately, many of those people make big mistakes when buying their next system, so to help you avoid doing so, here are some simple things you should not do.

  1. Ignoring Air Quality – Air quality is about more than comfort. It affects the health of everyone in your home equally. Consider it carefully when installing a new system.
  2. Avoiding Even Heating and Cooling – One room being cooler or warmer than another is not okay. It’s bad for your system and bad for your home’s comfort level. Have insulation and ductwork checked before installation of a new HVAC system.
  3. Not Upgrading Your AFUE or SEER – New systems are highly efficient. Take advantage of that by buying one with a higher AFUE or SEER rating.
  4. Not Vetting Your Contractor – Always spend time checking up on your contractor, reading reviews and asking other customers how their experience was.
  5. Skipping the Service Agreement – Service agreements save money and help your system last longer. Don’t skip them.
  6. Buying the Cheapest Option Available – It may be tempting, but a cheap HVAC system is a bad idea if you want it to last and save you money in heating and cooling. Even a midrange system will save you money in only a few years with higher efficiency ratings.
  7. Picking the Same Model You Already Had – New models are stronger and more efficient. When possible, get an upgrade and your bills will reflect the difference.
  8. Waiting too Long to Buy – The longer you wait, the more you pay in heating and cooling bills for an old, worn down system. If you know you’re going to buy a new system, act fast to save the most possible money.
  9. Not Asking Questions – If you have a question, ask it. There is no such thing as a stupid question when looking for a new HVAC system.
  10. Ignoring Maintenance Recommendations – Maintenance recommendations are optional but almost always to your benefit. Research on your own before committing to anything, but don’t ignore the necessity either.

If you do things just right, your new HVAC system will last for years to come and provide steady, comfortable heating or cooling throughout that time. But, if you rush through things, make a hasty decision and neglect to do any research, you may have issues with your system in far less time than you’d like. Be smart and you’ll be rewarded.

Tags: , , , , , ,
Posted in Services | Comments Off

Keeping Your Home Toxic Chemical Free

Wednesday, June 29th, 2011

So, you have decided you want to try to go chemical free in your home. Whether you want to be friendlier to the environment at large or just foster a healthier home environment for yourself or your kids, eliminating toxic chemicals is a big step. Below are some tips to help you go about it the right way.

Removing Toxins

The first step is to eliminate some of the major toxic chemicals that may already be in your home. First, make sure your home’s ventilation system is functioning properly. Clean vents regularly and inspect the system and change the filter annually.

Consider using a water purification system to remove chemicals like chlorine — which is used to kill microbes in many water systems — as well as drug residues and heavy metals. Remember as well that lead is a dangerous toxin, so have your home inspected for it. Remove and replace any paint, pipes, or other materials made of lead. This is especially important if your home was built prior to 1978.

Finally, have your home checked for radon and asbestos. These are both harmful toxins that can easily be breathed in without being noticed. Check for radon especially if your home has a finished basement, or if your family spends a significant amount of time in the basement.

Keeping them Out

Now that you have expelled these contaminants from your home, look for ways to avoid inviting other potentially dangerous chemicals in. Most of us use toxic chemicals every day without even realizing. To help keep these toxins out of your home, you should look for cleaning supplies that are chemical-free. Companies that manufacture and distribute chemical-free cleaning products include Method, Seventh Generation and Ecover.

You can take it a step further by using DIY cleansers. Baking soda, lemon juice, vinegar and salt are all useful in household cleaning and are much safer for children and pets than chemical-based products. Drain clearing products contain extremely harsh chemicals that can contaminate water supplies and even damage your plumbing. A combination of baking soda, vinegar and boiling water can be just as effective without the toxicity.

Finally, use soap as an alternative to chemical air fresheners. Simply leave a few bars around the house in strategic locations. The soap will absorb nearby odors. For added effect, use scented soap.

Start with these simple steps and you will be off to a good start in keeping harmful chemicals out of your home and away from your family.

Tags: , , ,
Posted in Services | Comments Off

« Older Entries