Posts Tagged ‘Heat Pumps’

Cleveland Heat Pump Tip: How to Maintain High Efficiency Filters

Monday, March 26th, 2012

The filter on your Cleveland heat pump is an integral part of your home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters

High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

 Recommended Filters

You have options as to which types of filters you use for your Cleveland heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your heat pump.

For more information about how to maintain your Cleveland heat pump, give Pompeii’s Plumbing & Heating a call!

Tags: , , , ,
Posted in Heat Pumps | Comments Off

North Royalton Heat Pump Repair Guide: Reasons Your Heat Pump Can’t Maintain the Right Temperature

Wednesday, March 14th, 2012

When you set your North Royalton home’s thermostat for a certain temperature, you expect that your heat pump will either heat or cool it to that temperature, right? When you want 72 degrees, you don’t expect to have the temperature stay stuck at 70 degrees while your heat pump struggles futilely.

Sometimes heat pumps have trouble maintaining the right temperature, especially in heating mode. It’s not uncommon, and it has a number of potential causes. Run through this checklist to see if it is something you can fix yourself:

  • The outdoor unit is iced up. Running a defrost cycle can usually fix this.
  • A snow drift in encroaching on the outdoor unit, making the unit too cold to work properly. Shovel it away and see if that fixes the problem.
  • The outdoor unit is not running at all. Sometimes this is simple enough to fix on your own. Read the manufacturer’s instructions to troubleshoot the problem.
  • Too much cold air is getting in the house for the heat pump to keep up. Make sure your doors and windows are closed to keep that valuable heat inside.
  • Your vents are closed. It may seem obviou, but problems like this can sometimes be attributed to user error. Make sure your vents are open to allow heat in.

This is by no means an all-inclusive list, and it covers just those causes that you could potentially fix yourself. There are many other possible culprits out there that could be more sinister and require professional service to be properly repaired.

Some of these include:

  • The compressor is not running.
  • A compressor valve or reversing valve is faulty.
  • The thermostat is malfunctioning or needs to be recalibrated.
  • The refrigerant level is low or there is a problem with the flow of the refrigerant.
  • The heat pump needs routine maintenance.

If your North Royalton heat pump is not working properly for several days, especially after you have tried some of the DIY solutions above, call Pompeii’s Plumbing & Heating Inc. right away. Your heat pump may need repairs before a bigger problem develops.

Tags: , , , ,
Posted in Heat Pumps | Comments Off

Westlake Heat Pump Repair Question: Why Do Heat Pumps Need Refrigerant?

Wednesday, February 29th, 2012

Despite its name, a heat pump is not designed solely for heating. In fact, the technology in your Westlake home’s heat pump was originally designed for air conditioning and is used today in air conditioners, refrigerators and cooling units in vehicles and airplanes. And the entire process relies on refrigerant – a chemical compound that is compressed and expanded to move energy from one environment to another.

 How Refrigerant Makes Heating and Cooling Possible

Your heat pump has multiple components designed to transfer refrigerant from one state to another. The compressor, for example, compresses the refrigerant into a liquid. The liquid is then moved through the expansion valve to the evaporator coils where it expands into a gas. Because refrigerant evaporates at much lower temperatures than water, it does this rapidly and in the process draws heat from the surrounding environment.

That’s how an air conditioner or your refrigerator cool a space. However, in the case of a heat pump, the process can work in both directions. In cooling mode, your heat pump extracts heat from the air going into your home. In the case of heating mode, the heat pump extracts heat from the outside air. Because the heat is transferred into the refrigerant, it can then be recompressed by the compressor. The heat is then is then released in the condenser coils, where the gas returns to liquid state. A blower then distributes air blown across the condenser coils into your home as heat.

 Troubleshooting the Process

A heat pump is a complex piece of machinery, but once you know how it works, you can perform quite a bit of troubleshooting should anything go wrong with the device. For example, if you notice cold air coming from your vents, you can check to make sure it isn’t in cooling mode and that there is enough refrigerant in the device.

Keep in mind that if any service needs to be performed on the heat pump involving refrigerant, you should call a Westlake professional due to the volatile nature of the chemical. In most municipalities, you must have a license to distribute or dispose of refrigerant and even if not, it can be dangerous to both you and the environment. If you suspect their is a problem with your heat pump, give Pompeii’s a call today!

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

Is a Heat Pump Right for Your Cleveland Home?

Monday, November 28th, 2011

Deciding which type of home comfort system to go with in Cleveland can be a difficult process to navigate. There are a ton of factors to take into account including how much you will be using the system, and what type of fuel you mainly rely on.

Heat pumps are a great home comfort solution for many people but they aren’t always the appropriate choice. However, there are many benefits to going with a heat pump system, so this is certainly an option you should keep in mind as you evaluate your options.

Heat pumps work by extracting heat from the air in one place and then transferring that heat to another space. For instance, in the winter, heat pumps take heat from the outside air and pump it into your house. In the summer, on the other hand, your heat pump will be able to take heat from your indoor air and pump it back outside, thereby keeping your home cool and comfortable.

Heat pumps are also extremely energy efficient because they don’t actually have to generate the heat they pump. Unlike furnaces, which take in fuel and convert it into heat, heat pumps simply harness the heat that’s already there, making them by far the more energy efficient option.

Another benefit to heat pumps is that they maintain a more constant temperature than many other types of heating systems do. Rather than pumping in a big blast of hot air and then waiting until the temperature indoors falls below a preset level before doing it again, heat pumps provide a relatively constant stream of warm air.

The initial amount of heat is smaller than what you might be used to from a furnace, but the cumulative effect means that you’ll be able to enjoy a much more consistently comfortable indoor environment.

It is important to evaluate the climate in your area before you decide to purchase a heat pump, though. These systems are extremely effective at heating and cooling your home as long as temperatures stay above the mid-thirties.

Below that, you may need to install some type of supplemental heating in order to keep your home warm enough on those really cold days. So if you live in an area where temperatures routinely dip below freezing for large portions of the winter, a heat pump might not be the most sensible solution for you.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

What is the Emergency Setting on My Heat Pump? A Question from Cleveland

Wednesday, October 26th, 2011

While installing or inspecting the heat pump in your Cleveland home, you may have noticed that little switch or button labeled something like “Emergency Mode.” And then, you probably scratched your head and thought, “what is that for?”

Hopefully, the emergency setting is not something you will ever have to use. But, it is there for a reason, so it’s possible you may have to resort to it at some point. In that case, it makes sense to know what it is first.

The emergency setting on your heat pump interrupts the normal operation of the device. The compressor shuts off, so the heat pump no longer pumps heat from the outside into the home. Instead, the internal heating element is activated. This backup system is designed to provide a sufficient, albeit minimal, amount of heat when the heat pump is not working properly. The idea is that the element can keep your home warm enough while you get the heat pump fixed.

That’s what the emergency setting is, but when would you use it?

It’s not a trick question. As the name implies, you only want to use this setting in an emergency. For example, if the heat pump has frozen and isn’t operating, the best course of action is to switch on the emergency mode and call a professional to repair it.

You would also want to use the emergency mode when recovering from a power outage. Any time a heat pump is without power for more than thirty minutes the refrigerant can cool and get too thick to properly flow through the coils. Turning the pump back on in this situation can damage it, so instead you would use the emergency mode for a while to warm the refrigerant back up, then return to operating the heat pump normally.

The emergency setting is not to be used in place of a supplemental heating system. If there is an uncharacteristic cold snap, and your heat pump can’t keep up, then it makes sense to use the emergency setting to keep the house warm. However, if you live in a colder northern climate, where temperatures routinely drop below 30 degrees in the winter, you should have a supplemental heating system in addition to the heat pump. Using the emergency heat setting regularly is not a good idea.

Tags: , , , , , ,
Posted in Heat Pumps | Comments Off

Common Heat Pump Problems: A Tip from Westlake

Monday, October 24th, 2011

Heat pumps are great pieces of machinery to have in your Westlake home, but they are not perfect. They come with their own problems and issues. Usually these can be fixed pretty easily, but it’s good to know what you are looking for.

Below are some common problems encountered by heat pump owners, along with some brief troubleshooting and repair advice. However, for any serious repair job, it is recommended that you call in a professional to fix the problem. This is to ensure the best performance of your heat pump, as well as for your own safety.

  1. No Heat – Obviously, this is a problem. A heat pump should do two things—heat and cool. If it’s not heating at all, something is wrong. Sometimes, this is just a matter of the power supply being interrupted. Press the “Reset” button on the power supply. If that does not fix it, it could be that the power supply has failed or the motor is overloaded.
  2. Incorrect Temperature – For example, you set the thermostat at 72 degrees, but even after several hours, the temperature won’t get over 70 degrees. This can be a problem with the sensor in the thermostat or with the heat pump itself. However, it could also just be the result of very cold temperatures outside. Heat pumps have trouble keeping up when the weather is consistently below 30 degrees Fahrenheit or so, so it may just need help in the form of a supplemental heat supply.
  3. It’s Noisy – Heat pumps are generally designed to run very quietly, so if you notice a lot of noise, there is probably something going on. Common culprits for this type of issue include loose connections, like screws, nuts and bolts. Check for any loose fittings on the heat pump. Also, make sure the contractor who does your annual heat pump inspection tightens these fittings as part of his maintenance routine.
  4. Frozen – This can be indicative of a few underlying problems, but the most common is dirt in the air filter. When filters get clogged, the heat pump can get frosted, ultimately leading to freezing. Check the air filter and make sure to change all air filters regularly.

Heat pumps can experience other issues, but these are some of the more common ones. Generally, though, heat pumps are pretty headache-free machines. Be sure to call a professional repair person is you experience any issues with your heat pump.

Tags: , , , , ,
Posted in Heat Pumps | Comments Off

Furnace vs. Heat Pump: A Guide from Amherst

Monday, October 17th, 2011

If you’re preparing to replace your existing heating system in Amherst, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have, and they can be expected to last anywhere from 15 to 25 years when properly maintained. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.

Tags: , , , , , , ,
Posted in Heating | Comments Off

How Does a Heat Pump Work? A Question From Rocky River

Monday, October 3rd, 2011

If you’re in the market for a new Rocky River home heating and cooling system, a heat pump is definitely an option worth considering. However, while the popularity of these systems is growing rapidly, many people still don’t understand what they’re all about. Before you go out and get yourself a new home comfort system, you should make sure you really know what you’re looking at

As their name suggests, heat pumps move heat from one location to another. However, their name can be misleading as well. Heat pumps are able to both heat your home in the winter and keep it cool in the summer by taking heat from the air in one place and sending it to another.

For example, your heat pump will remove the heat from your indoor air in the summer and pump it outside to keep your home cool. In the winter, the process is reversed, and the heat pump gathers heat from the outdoor air and pumps it inside to keep you house warm.

Of course, it’s not hard to see how the air inside your home in the summer has heat in it. But the outdoor air in the winter is cold. So how does a heat pump heat your house with cold air? Well, the truth is that there is almost always some heat in the air, no matter how cold it seems to you and me.

In fact, the temperature would have to drop well into the negative range before there was absolutely no heat to be found in the air. And heat pumps are specially designed to find that heat and collect it.

Basically all heat pumps work on this principle. However, they can’t keep your house comfortable all on their own. Heat pumps are usually installed as part of a complete home heating and cooling system. This means they’ll be paired with an air handler that can circulate the temperature controlled air throughout the house.

There are also some heat pumps that supplement the amount of heat they’re able to pull out of the air by heating it as it passes through. These types of heat pumps are often more effective in cooler areas, but because they require more energy to actually generate heat, they’re not typically as energy efficient as models that rely on their ability to get heat only out of the air.

Tags: , , , , , ,
Posted in Heating | Comments Off

Do Heat Pumps Work for Air Conditioning? A Question From Bay Village

Monday, August 15th, 2011

It’s possible that in the course of your search for a new air conditioning system in Bay Village, you read or were told about heat pumps. Doesn’t sound right, does it – heat pumps providing cooling for your home? Regardless of the seeming misnomer, heat pumps are actually much older and more reliable cooling technology than you know. And once you understand how these units work, the name makes much more sense.

What Is a Heat Pump?

Technically every refrigerant containing air conditioner is some form of heat pump. A heat pump is a device that removes heat from one area and transfers it to another. So, in the case of your air conditioner, warm air cycles into the condenser, the heat is removed, and the cooled air is circulated back through your home. The actual science behind this is slightly more complicated, but the gist is simple – cold air isn’t produced and then pumped into your home; warm air is removed.

Your refrigerator and freezer operate under the same principle. It works so well that it’s been a standard technology for nearly 100 years, albeit with quite a few upgrades and enhancements. So, if an air conditioner already is a heat pump, why are these devices called something different? Because heat pumps can do so much more.

Heat Producing Heat Pumps

A true heat pump can work in two directions. It can extract heat from your home or it can extract heat from outside and pump it into your home. A true heat pump offers year round climate control because it both heats and cools – not too shabby if you think about the cost of a furnace and central AC system. And with modern green technology, heat pumps can even be connected to geothermal systems that draw their energy from the earth – saving a tremendous amount of money.

So, back to the main question – should you purchase a heat pump for your air conditioning needs? The short answer is “it depends”. For the most part, a heat pump is comparable to the same air conditioning model in terms of energy efficiency and capacity. The major difference is its ability to heat your home. So, if you are interested in ditching the furnace or boiler, it may be a great upgrade. If not, a standard air conditioner can get the job done equally well.

Tags: , , , ,
Posted in Heat Pump Systems | Comments Off