Posts Tagged ‘Furnaces’

A Question from Fairview Park: What is a Gas Furnace Draft Hood?

Wednesday, December 28th, 2011

As every Fairview Park HVAC contractor knows, a draft hood is a necessary part of any gas burning appliance. For a gas furnace in particular it ensures steady air flow to the burners to avoid flares or the pilot light being put out by fluctuation in temperature and air flow.

What the Draft Hood Does

The draft will change in the chimney as exhaust vents towards it – especially when going from cold air to hot. A draft hood is placed above the upper most part of the gas furnace to draw air into the chimney and makes it possible to draw more or less air through the chimney as necessary to create a constant flow.

This makes it possible for the burner to enjoy consistent air flow without any wind gusts or sudden temperature spikes or drops. Hot air, if not put through a draft hood would create a strong air flow through the burners.

A draft hood cools the air as it is released by the burners from 500 degrees F to between 300 degrees F and 350 degrees F. The cooling needs to be carefully calibrated to avoid condensation build up in the chimney however – a problem that occurs when the temperature gets too low.

Maintaining Pressure

The draft hood is a part of a larger system designed to maintain air flow to the chimney. For every cubic foot of gas burned, the furnace needs to have 15 cubic feet of air for combustion and another 15 cubic feet of air for dilution. A draft hood and the rest of the ventilation system make it possible to put a furnace that has many thousands of BTUs in the basement of your home and still supply it with enough air to burn gas and dilute the exhaust before it enters the chimney.

For all of these reasons, if you see your pilot light flickering irregularly, notice a backflow of exhaust or a burning smell in your furnace room, it’s important to call a Fairview Park professional who can inspect and repair the problem before it becomes any worse. Not only can gas burner exhaust contain high levels of carbon monoxide, it can be bad for the device and the chimney if it doesn’t vent properly.

Tags: , , , , , ,
Posted in Heating | Comments Off

My North Royalton Furnace Isn’t Producing Enough Heat – What to Do

Friday, December 16th, 2011

If your North Royalton home is cold, many blame the furnace for not bringing up the warm temperatures or they blame the thermostat for not working right.

It may very well be a thermostat issue – often caused by the location of the thermostat – that is causing the problem. However, sometimes root cause is found in the furnace or ventilation system.

Your indoor environment may be contributing to a seemingly slow-moving furnace. Your furnace may be working too hard to keep up with the heat demand because of an excessive build-up of dirt or debris on the filter or around the moving parts, such as the motor or fan belt. The most obvious thing to do is to keep the airflow unobstructed and keep all working parts clean.

First of all, you should regularly check your furnace filters and if they are dirty, replace them or clean them. Disposable furnace filters are relatively inexpensive and come in a variety of sizes and media ratings (ratings determine what size media is used and its ability to trap certain sized particulate). You can buy these individually or in bulk from a number of different resources. It is a good idea to replace the filters every three-six months.

Mesh filters can be removed, cleaned and reinserted. Like replaceable filters, mesh filters should be checked on a regular basis and then cleaned at least every three months.

You can remove the access panels to your furnace and inspect the components for any build-up of dust, dirt, or debris. Using a vacuum with an extension hose usually is all it takes to clean up the area.

Other reasons for poor heating performance include dirty or blocked ductwork. The harder your furnace has to work to push air through the ventilation system, the longer it takes to bring the heat up. Make your furnace work less and keep vents clear and ductwork clean.

Finally, the reason your furnace isn’t producing enough heat may not be the fault of your furnace at all – you may have a leaky house. But that’s a whole different story.

Tags: , , , ,
Posted in Heating | Comments Off

Why is My Cleveland Furnace Turning On and Off?

Wednesday, December 14th, 2011

One of the most annoying things your Cleveland home’s furnace can do is to constantly keep turning on and off. This on-off cycling keeps your home from heating up properly. This action – called short cycling – also requires more electricity and drives up utility bills.

Short cycling is caused by an overheated furnace, which triggers safety mechanisms and shuts down the furnace. After a brief interval and cooling down, the furnace starts up again the cycle keeps repeating itself. Not only is it an annoyance, it can also signal more serious problems. A leaking heat exchanger can cause a furnace to overheat – and produce deadly carbon monoxide gas.

If a furnace is working too hard and overheating, it is usually because of airflow in and out. Your home’s ventilation system needs to be clear of dirt, dust, and debris. The more blockage in your ductwork and vents, the more friction is created, slowing down airflow and ultimately ending with an overworked furnace that continues to cycle on and off. And a blocked exhaust vent, such as a chimney or dedicated exhaust vent, can also cause a furnace to work harder. Check for things like leaves or bird’s nests.

The blockage may also be coming from a clogged furnace filter. You should clean or replace your furnace filter after a visual inspection reveals any type of build-up of dust or dirt. Do this at least every three-six months.

If you have a two-speed fan on your furnace, it is recommended that you run the fan in low speed during the cold months and high speed in the warm months. The reason? Warm air is lighter and takes less force to move.

There are other measures to take to prevent short cycling but these usually require a professional heating and cooling service technician to correct the problem. If in doubt, call your local qualified heating and cooling contractor and schedule a furnace inspection. Don’t make your furnace work any harder than it was designed for – and keep your home’s occupants comfortable and safe.

Tags: , , , , , ,
Posted in Heating | Comments Off

Free By-Pass Humidifier with the Purchase of a 95% Efficient Furnace!

Wednesday, November 2nd, 2011

Winter is well on its way, and it is time to start thinking about upgrading your heating system and your indoor air quality. Pompeii’s is here to help you out; we are offering a free by-pass humidifier or upgraded Media Filtration System with the purchase of a 95% efficient furnace! A more efficient furnace will save you money and lessen your impact on the environment, definitely a worthwhile investment. And with your house sealed up tight for the winter, some great indoor air quality products will help keep your family healthy. For more information, give us a call today!

Lorain County – 440-937-6006

Cuyahoga County – 440-937-6006

Not valid with any other offers. Discount off of standard rate. Limit one per household.

Tags: , , , ,
Posted in Promo | Comments Off

Furnace vs. Heat Pump: A Guide from Amherst

Monday, October 17th, 2011

If you’re preparing to replace your existing heating system in Amherst, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have, and they can be expected to last anywhere from 15 to 25 years when properly maintained. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.

Tags: , , , , , , ,
Posted in Heating | Comments Off

Maintenance Tips From Cleveland: Why You Should Have Your Furnace Serviced Every Heating Season

Wednesday, October 5th, 2011

Particularly if you’ve just purchased a new furnace in Cleveland, it’s probably not something you think about all that much. As long as it works when you need it to, that is. Unfortunately you usually find out that something is wrong with your furnace just when you need it most. However, there is a way to avoid that kind of problem, and many others, and that’s to have regular maintenance service performed on your furnace by a home heating professional every year.

One of the main reasons to have your furnace serviced is that it allows technicians to catch small problems before they become large ones. During a typical maintenance visit, a technician will examine all parts of your furnace to ensure that they are still in good working order. He’ll also thoroughly clean out the unit to make sure there are no buildups of debris that could cause problems or impede the furnace’s energy efficiency.

And if they do find something wrong like a part that’s beginning to wear out or something that just isn’t working properly, the technician can make the necessary repairs right away. You can get the problem taken care of ahead of time and you won’t have to worry about going without heat during the coldest part of the winter.

That’s not the only reason that annual maintenance is important and beneficial, however. It can also help you save money, both on your monthly energy bills and in the long term. That’s because annual maintenance tune ups keep your furnace functioning at peak efficiency levels longer than they would be able to otherwise.

A typical furnace will lose a small percentage of its energy efficiency every year, and while it won’t seem like a lot at first, that can really add up over the course of a couple of years. With regular maintenance, though, you can often maintain up to 95% of your furnace’s original efficiency for the life of the furnace.

Plus, when the proper maintenance and service is performed on a regular basis, your furnace will simply last longer.

Tags: , , , , , ,
Posted in Heating | Comments Off