Archive for March, 2011

AC Maintenance: Why You Cannot Neglect It

Wednesday, March 30th, 2011

Especially if you have just purchased a new air conditioning system, maintenance is probably the last thing you are thinking about. In fact, if you are like most people, you do not think about your air conditioning system at all until it does not work when you need it. But if you simply continue to use your air conditioning system without maintaining it, you will be setting yourself up for a lot of problems later on.

Just like your car or any other machine that you run on a regular basis, your air conditioning system requires a regular tune up to keep it running like it is supposed to. The type of air conditioning system you have will dictate exactly how often this maintenance service needs to take place, but most systems benefit greatly from having a tune up once a year.

When you have just purchased an air conditioning system, the last thing you probably want to do is shell out a bunch of extra cash when the system is still running fine. But it really is much cheaper to pay now rather than waiting until you have a problem with your air conditioner to call for service.

During a regular maintenance visit, your technician will examine all of the component parts of your air conditioning system to make sure that they are working the way they should and not showing any signs of excess wear and tear. This is a great way to detect problems early, even when they have not yet begun to show in the air conditioner’s performance.

Your air conditioning technician will also thoroughly clean out your system to ensure that no excess debris is allowed to build up around the coil or other vital parts of the air conditioner. This is important because it helps the air conditioner to continue to function at peak energy efficiency levels. Without regular maintenance, your air conditioner will gradually lose efficiency over time. It will only lose a little bit every year, but if you do not do something to stop it, those little bits will quickly add up.

Regular maintenance also helps to prevent more costly and inconvenient repair visits later on. And it will certainly help to increase the lifespan of your air conditioner as well. Whether you have just purchased an air conditioning system or have had yours for several years, it is never too late to start your annual maintenance visits.

Tags: , , , ,
Posted in Services | Comments Off

Crawlspace Heating Tips

Monday, March 28th, 2011

Keeping your crawlspace warm and insulated might not seem like something that should be at the top of your priority list. However, if you really want to find ways to save money on your heating and cooling bills and keep your home as comfortable as possible, it’s definitely something you should look into.

The crawlspace of your house is generally located beneath the floor and since it’s not someplace that you’re likely to spend much time, it’s generally not insulated or sealed against the elements very securely. In some cases, heating and cooling ducts and pipes carrying hot water can run through the crawlspace as well.

The lack of insulation in the crawlspace of your house can impact your indoor environment in a couple of ways. First of all, it often means that your floor is cold to walk on and that cool air can seep in through any cracks there might be in your flooring. This infiltration of cooler air means that your home heating system will have to work harder to maintain a comfortable temperature inside.

Also, the air and water traveling through the ducts and pipes in your crawlspace will be losing heat as they go, so you won’t be getting all of the heat you’re paying for on that end either. Adding insulation in your crawlspace is the best way to keep from losing heat in this way. It’s generally not a huge investment and it will save you quite a bit in the long run. It can also help your heating system last longer because it won’t have to work so hard to keep your home warm enough.

If you live in an area with relatively mild winters and hotter summers, you might think that investing in some crawlspace insulation wouldn’t be worth it for you. But the truth is that you can save just as much by keeping your cool air inside in the summer as someone in a cooler climate can by keeping hot air inside in the winter.

And insulating and heating your crawlspace isn’t just about keeping the rest of your house warm. It can also help to keep moisture problems from developing. An excess of moisture in your crawlspace can quickly allow mold to develop and too little moisture is damaging to wood and can cause your heating system to function less effectively overall.

Tags: , , , ,
Posted in Services | Comments Off

Furnace Fan Doesn’t Run? Why Is That? What Should You Do?

Friday, March 25th, 2011

There are several reasons that a furnace fan might stop working at one point or another. While many of these do require professional attention, there are probably some things you can check on your own before you go and call in the pros. After all, if you can address the problem on your own, it will at least save you from having to pay a technician to come out.

The first thing to check when your furnace is running but the fan isn’t turning is whether or not the fan is actually switched on. Certain models of furnaces have a separate switch to turn the fan on and off. While there is probably no reason that you would want to turn off the fan by itself, it’s worth taking a look just in case. If that really is the problem, you’ll be up and running and back to dealing with better things in no time.

If that’s not the problem, you might try looking to see if any wires leading to the fan are loose or the fuse is blown. If the fan has no power, of course, it won’t be able to work but the rest of the furnace likely would work just fine as long as it doesn’t run on electricity as well.

Of course, the problem very well may be beyond your power to solve on your own. Don’t despair though. Even though you need to call in a professional, that doesn’t mean that the problem will be expensive to fix. In fact, it may be as simple as replacing your thermostat or the motor for the fan itself.

Just because a fan isn’t working doesn’t mean that you’re going to be paying an arm and a leg to have work done on your furnace. If you can’t easily discover the problem on your own, however, or if you’re not comfortable inspecting this type of equipment at all, you’re generally better off just calling in an expert and letting them do the dirty work for you. Paying for simple furnace fan repairs is definitely preferable to having to pay someone to fix the fan and the stuff you broke yourself while trying to fix the fan on your own.

Tags: , , , ,
Posted in Services | Comments Off

Pipe Inspection Camera: When to Use One

Wednesday, March 23rd, 2011

For plumbers today, pipe inspection cameras are a huge aide. In the past, it was often very difficult to determine the location of a blockage or a leak, or indeed if one even existed at all. But now with this great modern equipment, it is much easier to get a thorough picture of the exact state of a pipe system and the nature of a potential problem.

These types of inspection cameras are especially useful when a clog is located underground or when an underground leak is suspected. Many types of plumbing problems can have multiple possible causes. But with pipeline inspection cameras, you can know for sure quickly exactly what type of problem you are dealing with.

For instance, even if you know that an underground pipe is leaking, it can be next to impossible to figure out exactly where the leak is. But to fix the leak you will have to unearth the damaged section of pipe and repair it. If you cannot pinpoint the leak precisely, you will be forced to unearth a large section of pipe. This takes a long time and causes unnecessary, although hopefully temporary damage to your yard as well.

However, if you can determine exactly where the leak is, you can dig up only the affected portion of pipe. This saves a lot of time and labor and it also means that you can limit the disruption the work causes in your yard. And the best way to find a leak like this is to use a pipe inspection camera to get a look at the inside of the pipe before you ever begin digging.

You do not need to wait for an emergency situation to develop to make use of a pipe inspection camera either. This technology is also extremely useful during annual drainage and sewer maintenance visits to help ensure that there are no unnoticed problems lurking below the surface. It is perfectly possible that one of your pipes is getting close to cracking but has not done so yet. The repairs can be a lot simpler if you catch this type of problem early, and that is exactly what a pipe inspection camera makes possible.

Pipe inspection cameras are also useful during maintenance visits because they allow technicians to determine which parts of your system need the most work. They can see where the larger buildups are and get the job done quicker overall than they could if they were operating blind.

Tags: , , , ,
Posted in Services | Comments Off

Plumbing Noises: Different Kinds, Where They Come From and Why They Occur

Monday, March 21st, 2011

Under ideal conditions, you would hear nothing from your plumbing system except the sound of running water when you turn on the tap. Unfortunately, that is not always what actually happens. In fact, your plumbing can make all types of funny and sometimes alarming noises for no reason that you can easily discern.

For instance, one common plumbing noise sounds like a hard knock or hammer blow. This usually occurs when you turn off a tap and can be rather alarming. Sometimes you can even feel the reverberation of the impact that caused the sound. But why is this happening? Usually, this “water hammer” noise is the result of the dramatic shift in pressure in the system when you suddenly stop the flow of water from a faucet.

This sudden stop creates a kind of shock wave, which then travels back through the pipes and causes the loud knocking sound that you hear. This is easily fixed with a device that is known as a water hammer arrester. These devices help to dissipate the force of the pressure shift and can keep the noise from occurring at all.

There are also all kinds of whistling, squealing and squeaking noises that your plumbing can make under certain circumstances. These types of sounds are often caused by a worn out washer somewhere along the line that is having trouble regulating the flow of water. It can be a little difficult to pin down the source of these noises sometimes, especially if they occur no matter which faucet is turned on. But with a little hunting and trial and error you can usually track down the source.

Rattling sounds are also common and generally occur when your water pipes are not well secured to a rigid surface. If this is the case, the force of the water running through the pipes can cause the pipe to vibrate, creating the sound you hear as it bangs against whatever solid surface is nearby. For problems like this, simply securing the pipes in place better can put an end to all of your rattling issues.

Tags: , , , ,
Posted in Services | Comments Off

What Is the White Substance around My Showerhead and Faucet, and Why Is it There?

Friday, March 18th, 2011

For many people, it is common to notice a buildup of some type of white substance on showerheads and faucets around the house. Of course, this looks bad and would seem to indicate a problem. But what is it really? And what can you do about it?

Well, to begin with, this type of buildup is usually nothing more than mineral deposits. The minerals are in the water that flows through the faucets and can settle out on the fixtures, particularly in the shower where a lot of the water you use evaporates. When the water evaporates, it leaves these mineral deposits behind, and they can cause quite a buildup over time.

In areas where the water is very hard, this type of buildup problem will be greater, but it is actually a relatively easy problem to fix. The best way to get these mineral deposits off of your shower and faucet fixtures is to allow them to soak in vinegar overnight. After an appropriate period of soaking, the mineral deposits should come off easily with moderate scrubbing.

But no matter how many times you remove these deposits, they will always come back. They are simply a result of the makeup of your local water, and so unless you take greater action, you will have to repeat this process on a regular basis if you want to stay residue free.

However, there is another option. Rather than having to soak all of your fixtures in vinegar every so often, you may want to consider having a water softening system installed in your home. These systems are appropriate in areas where the water is very hard and they can go a long way towards eliminating buildup of sediments and minerals all over your home water system.

Tags: , , , ,
Posted in Services | Comments Off